screw_together_filter

Travelite 1.25" Filter Holder

Of course, we still have our Travelite 1.25" Filter Holders available also. We have adapted the small TraveLite IDS container to handle 1.25" filters. The polypropylene triple hinged, double latched container has 12 adjustable barriers with foam inserts set up to hold up to 15 1.25" filters at their edges. Both single filters and double size lunar polarizing filters will fit (see pictures below). They don't rattle around in here, and they can be seen edge on so one can read which filter you have in the dark. If you can find a better, more compact way to hold this many filters, I haven't seen it. The foam inserts are not glued in as they don't tend to fall out, and this allows you to repartition a section for another use if desired.
The TraveLite Filter Holder will hold 15 1.25" filters. The container is 7" x 4 1/8" x 1.5". $12.00 includes US shipping. Unfortunately I have never been able to find a case for 2" filters.

1.25" and 2" Filter holders with "screw together" containers
1.25" When I first saw these, I immediately thought, "That is what I have been looking for". The cases are 1.5" in diameter, 1.0" high and hold a single 1.25" filter. The bottom of one screws into the top of the next so that you can keep your filters together. The clear plastic can be written on with marker or paint to identify the filter inside if you have trouble reading the filters in the dark like I do. You can screw as many as you like together. These come as a 6 pack with 2 lids so you can just put 3 together or have an extra lid. The bottom is open threaded waiting for the next cell to be added. Your filters stay clean, and the filter surface untouched. I use mine without padding as only the metal edges can touch plastic. A 6 pack costs $8.00 including US shipping. Note: The case units are tall enough to add a bit of foam padding if you wish. I have found that to be unnecessary for my use, and I wish to keep costs low so these come as shown.
2.0" These are the two inch version of the screw together holders above. They come 4 to a package with 1 lid per package. Each case is 2.5" in diameter and 1" high and holds a single filter. I use mine without padding as only the metal edges can contact plastic. A 4 pack cost $12 including US shipping. Note: The case units are tall enough to add a bit of foam padding if you wish. I have found that to be unnecessary for my use, and I wish to keep costs low so these come as shown.
Travelite 1.25" Filter Holder Of course, we still have our Travelite 1.25" Filter Holders available also. We have adapted the small TraveLite IDS container to handle 1.25" filters. The polypropylene triple hinged, double latched container has 12 adjustable barriers with foam inserts set up to hold up to 15 1.25" filters at their edges. Both single filters and double size lunar polarizing filters will fit (see pictures below). They don't rattle around in here, and they can be seen edge on so one can read which filter you have in the dark. If you can find a better, more compact way to hold this many filters, I haven't seen it. The foam inserts are not glued in as they don't tend to fall out, and this allows you to repartition a section for another use if desired. The TraveLite Filter Holder will hold 15 1.25" filters. The container is 7" x 4 1/8" x 1.5". $12.00 includes US shipping. Unfortunately I have never been able to find a case for 2" filters.